Pole Accessories

S-Tech Measure offers a wide range of pole accessories for your surveying and mapping needs. From bipods and mounts to pole adapters and rod accessories, we have everything you need to get the job done. And our points adapters make it easy to connect your GPS receiver to any surveying rod, giving you precision and accuracy in even the most difficult terrain. So whether you're looking for a way to improve your data collection or simply want to make your life easier, S-Tech Measure has the solution for you. Contact us today to learn more about our products and how we can help you achieve your goals.

70 items

Dutch Hill Carbon Fiber Bipod

Large surface contact with poles reduces chance of crushing or denting. Holds the pole more secu...

Large surface contact with poles reduces chance of crushing or denting. Holds the pole more securely than a single point clamp Fits from 1”-1.25” dia. Poles Open style clamp for easy setup Thumb release leg adjustment Length Collapsed: 42.5" Length Extended: 69" Made in the USA by Dutch Hill

$430.00

Leveling Rod Bipod - Flo Orange

This bipod features a special head that will hold a rectangular rod The head will fit rods with...

This bipod features a special head that will hold a rectangular rod The head will fit rods with widths between 1.57 and 2.56 inches Flo Orange Weighs 4.00 lb (1.82 kg)

$416.00

ChrisNik - Pipe Mic

Patent Pending and Pronounced "Pipe Mike", measurements are more accurate because you are measuri...

Patent Pending and Pronounced "Pipe Mike", measurements are more accurate because you are measuring with a vertically plumb rod. New round foot design slices through material at bottom of pipe and insures accurate invert and pipe diameter measurement. By pulling a pin you can go from zero to 1 foot vertical offset for clearance under rod. Grade rod is sold separately. Made for Crain 25' SVR and USL Grade Rods (grade rod NOT included), the Pipe-Mic II is made of lightweight (two pounds) non-ru...

$370.00

Invar Rod Bipod - Flo Yellow

This bipod features a special head that will hold a rectangular rod The head will fit rods with...

This bipod features a special head that will hold a rectangular rod The head will fit rods with widths between 2.95 and 3.54 inches Flo Yellow Weighs 4.00 lb (1.82 kg)

$365.00

ChrisNik - True Plumb w/ Adapter for fixed heig...

ChrisNik True PlumbModel Number: 16TPL2000Surveyors across the country have found True Plumb to b...

ChrisNik True PlumbModel Number: 16TPL2000Surveyors across the country have found True Plumb to be an invaluable quality control device. A compact, easy and convenient way to test and adjust your rod in just seconds. Adjusts all brands of prism rods.Features: Even with all of today's expensive precision equipment and advanced technology, your survey is only as accurate as your rod is plumb. Using the True Plumb, you can rotate your pole 360 degrees to check if it is bent. The True Plumb is m...

$360.00

Thumb-Release Bipod - Flo Yellow

A surveyor can set up a freestanding GPS antenna pole or prism pole 1-to-1.25 inch (25.4-to-31....

A surveyor can set up a freestanding GPS antenna pole or prism pole 1-to-1.25 inch (25.4-to-31.8 mm) outside diameter Poles attach easily through the open clamp 1.5 inch (3.81 cm) outside diameter Poles can be loaded through the top Legs (independently) extend to 6 feet (1.8 m) and collapse to 43 inches (109 cm) Flo Yellow Weighs 4.25 lb (1.93 kg)

$317.00

Offset Pole-Holder Kit

Perform odd setups and stay away from dangerous situations with the Offset Pole Holder Kit Comb...

Perform odd setups and stay away from dangerous situations with the Offset Pole Holder Kit Combine the kit with any 5/8 x 11 threaded pole and a Heads-Up™ Level for a safe and sturdy setup A padded case, hex wrench, and an adapter plate for instrument tripods are included Weighs 2.20 lb (1.00 kg)

$250.00

Claw Combo for Leica Viva CS10/CS15

Here's the next generation of quality SECO all-metal collector/controller cradles and clamps. The...

Here's the next generation of quality SECO all-metal collector/controller cradles and clamps. The streamlined design of The Claw™ cradles fit the body of a collector/controller snugly with easy, comfortable locking on the bottom of the cradle. The same is true for the pole clamp! The new design utilizes an \anti-crush" feature that locks up the cradle and clamp when tightened - although this feature is limited the risk of accidentally damaging the controller and pole is greatly reduced. These...

$204.40

Seco Data Collector Cradle, Claw Style, Surveyor 2

Seco Data Collector Cradle, Claw Style, Surveyor 2 Here’s the next generation of quality SECO al...

Seco Data Collector Cradle, Claw Style, Surveyor 2 Here’s the next generation of quality SECO all-metal collector/controller cradles. The streamlined design of these new cradles fit the body of a collector/controller snugly with simple, comfortable locking on the bottom of the cradle. The new design utilizes an ‘anti-crush’ feature that locks up the cradle when tight, but is limited — the risk of damaging controller is greatly reduced. These new cradles are constructed of corrosion-resistant...

$198.00

Seco Carbon Fiber replacement tube, 1 1/4", Black

Seco Carbon Fiber replacement tube, 1 1/4", Black

Seco Carbon Fiber replacement tube, 1 1/4", Black

$189.00

40 Minute Heads-Up Level

This innovative tool gives you an added sense of safety while doing routine surveys in traffic ...

This innovative tool gives you an added sense of safety while doing routine surveys in traffic areas You no longer need to look down while traffic is flying by — simply look through the window You can keep your surveying partner in sight for faster surveying, too The 40 minute Heads-Up™ level is more comfortable to read; the bubble is direct reading Weighs 0.40 lb (0.18 kg)

$168.00

Bracket with Battery Slot and Quick Release

The original Open Clamp Pole Bracket and Cradle technology designed by SECO These products offer...

The original Open Clamp Pole Bracket and Cradle technology designed by SECO These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller...

$166.00