Rod Accessories

S-Tech Measure offers the best rod accessories. From the bipod leg clip to the point washer and lock knob, each product is made with durable, long-lasting materials so that contractors can finish their projects safely and efficiently. But it's not just construction sites that stand to benefit - surveyors and other survey professionals rely on S-Tech Measure's bipod head assembly for repeatable accuracy when taking measurements.

21 items

ChrisNik - Pipe Mic

Patent Pending and Pronounced "Pipe Mike", measurements are more accurate because you are measuri...

Patent Pending and Pronounced "Pipe Mike", measurements are more accurate because you are measuring with a vertically plumb rod. New round foot design slices through material at bottom of pipe and insures accurate invert and pipe diameter measurement. By pulling a pin you can go from zero to 1 foot vertical offset for clearance under rod. Grade rod is sold separately. Made for Crain 25' SVR and USL Grade Rods (grade rod NOT included), the Pipe-Mic II is made of lightweight (two pounds) non-ru...

$370.00

ChrisNik - True Plumb w/ Adapter for fixed heig...

ChrisNik True PlumbModel Number: 16TPL2000Surveyors across the country have found True Plumb to b...

ChrisNik True PlumbModel Number: 16TPL2000Surveyors across the country have found True Plumb to be an invaluable quality control device. A compact, easy and convenient way to test and adjust your rod in just seconds. Adjusts all brands of prism rods.Features: Even with all of today's expensive precision equipment and advanced technology, your survey is only as accurate as your rod is plumb. Using the True Plumb, you can rotate your pole 360 degrees to check if it is bent. The True Plumb is m...

$360.00

Offset Pole-Holder Kit

Perform odd setups and stay away from dangerous situations with the Offset Pole Holder Kit Comb...

Perform odd setups and stay away from dangerous situations with the Offset Pole Holder Kit Combine the kit with any 5/8 x 11 threaded pole and a Heads-Up™ Level for a safe and sturdy setup A padded case, hex wrench, and an adapter plate for instrument tripods are included Weighs 2.20 lb (1.00 kg)

$250.00

Claw Combo for Leica Viva CS10/CS15

Here's the next generation of quality SECO all-metal collector/controller cradles and clamps. The...

Here's the next generation of quality SECO all-metal collector/controller cradles and clamps. The streamlined design of The Claw™ cradles fit the body of a collector/controller snugly with easy, comfortable locking on the bottom of the cradle. The same is true for the pole clamp! The new design utilizes an \anti-crush" feature that locks up the cradle and clamp when tightened - although this feature is limited the risk of accidentally damaging the controller and pole is greatly reduced. These...

$204.40

40 Minute Heads-Up Level

This innovative tool gives you an added sense of safety while doing routine surveys in traffic ...

This innovative tool gives you an added sense of safety while doing routine surveys in traffic areas You no longer need to look down while traffic is flying by — simply look through the window You can keep your surveying partner in sight for faster surveying, too The 40 minute Heads-Up™ level is more comfortable to read; the bubble is direct reading Weighs 0.40 lb (0.18 kg)

$168.00

Bracket with Battery Slot and Quick Release

The original Open Clamp Pole Bracket and Cradle technology designed by SECO These products offer...

The original Open Clamp Pole Bracket and Cradle technology designed by SECO These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller...

$166.00

Bracket with 40-Minute Vial

The original Open Clamp Pole Bracket and Cradle technology designed by SECO These products offe...

The original Open Clamp Pole Bracket and Cradle technology designed by SECO These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controlle...

$151.00

Ram Ball Clamp Mount - .75 into 1.5 in Pole

Pole Clamp with 1 inch Ram ball Fits poles with an outside diameter of 0.75 inches to 1.5 inches

Pole Clamp with 1 inch Ram ball Fits poles with an outside diameter of 0.75 inches to 1.5 inches

$138.00

Claw Cradle for Leica Viva CS10/CS15

These Claw™ clamps are made of durable anodized aluminum The Claw technology allows maximum tig...

These Claw™ clamps are made of durable anodized aluminum The Claw technology allows maximum tightening without crushing The Ball-and-Socket versions allow a collector to be in more positions Customize your own solution with these components Features a 1 inch ram ball Designed for Leica Viva CS10/CS15 Weighs 0.45 lb (0.20 kg)

$104.30

Bracket Plain

The original Open Clamp Pole Bracket and Cradle technology designed by SECO These products offer...

The original Open Clamp Pole Bracket and Cradle technology designed by SECO These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller...

$101.50

Bracket with 1.5 inch OD Pole

The original Open Clamp Pole Bracket and Cradle technology designed by SECO These products offe...

The original Open Clamp Pole Bracket and Cradle technology designed by SECO These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controlle...

$96.60

GPS Tripod 10 minute Heads-Up Level

GPS Tripod 10 minute Heads-Up Level Here€™s an invaluable piece of equipment to add to your ante...

GPS Tripod 10 minute Heads-Up Level Here€™s an invaluable piece of equipment to add to your antenna tripod The 10-minute Heads-Up„¢ level is more comfortable to read; the bubble is a direct reading Fits 1.50 in outside diameter pole

$94.50